how to play fable on psp
Hav u ever wanted to play fable on ur psp well now u can just follow these instructions
1. Open the PSP directory and edit the proper wifi.cfg for your PSP version and set the IP of the computer you are going to use this on. If you don't know your IP address. Go to your "Start" menu. Click on "Run..." When the box opens up type "cmd.exe" without the quotes. When the command prompt opens type "ipconfig" without the quotes. It will report your IP address.
2. Copy the correct director(y|ies) to your PSP depending on whether you have a v1.00, v1.50 or v3.xx PSP. If you use a custom firmware mod that allows the use of a single EBOOT.PBP files on a v1.50 PSP then you can use the v1.00 directory.
3. Download and install PPJoy.
4. After it is installed open up your "Control Panel" and click on "Parallel Port Joysticks".
5. When the window comes up click "Add..." at the bottom. On the next screen change "Parallel port" to "Virtual joysticks" and then click "Add."
6. It will want to install some drivers so either have it scan automatically or point it to the directory you installed PPJoy to.
7. After it is done installing, click the "PPJoy Virtual joystick 1" in the menu and click "Mapping..."
8. Choose "Set a custom mapping for this controller" and click "Next."
9. Set these options for best results.
Axes = 2 (X Axis and Y Axis)
Buttons = 9
POV hats = 1
10. X Axis = Analog 0
Y Axis = Analog 1
11. These buttons are up to you to set. You should leave "Button 1" set to "nothing" otherwise you may have problems using the Triangle button on your PSP later.
Button 1 = nothing
Button 2 = Digital 0
Button 3 = Digital 1
Button 4 = Digital 2
Button 5 = Digital 3
Button 6 = Digital 4
Button 7 = Digital 5
Button 8 = Digital 11
Button 9 = Digital 10
12. Directional button POV
North = Digital 6
East = Digital 7
West = Digital 9
South = Digital 8
13. Repeat the steps above to add up to a total of 4 joysticks.
14. Inside the PC directory, you will find a WiFiServer.exe. If you are just using one PSP to play games, you can run this file directly. If, however, you are or will be using more than one PSP, you will need to run one of the batch files in the directory. Simply double-click the batch file for the appropriate controller. You must have a server running for each controller you wish to use. The server(s) must also be running at all times while using the PSP as a joystick. When you are done using it, you can safely exit the program by pressing CTRL+C or clicking the close button for the window.
Example:
Two players will be playing a game. You will need to start the batch files for controller 1 and 2. Player 1 will choose Controller 1 from WiFiController and player 2 will choose Controller 2.
Note:
If the window opens and closes immediately, something went wrong and you'll need to either contact me or figure it out yourself. However, make sure you RETRY all the steps before contacting me. Also try reading over this site and the PPJoy website for help.
15. Now start the program on your PSP, choose your connection and your controller. It should connect to your computer and basically be working. You'll find out in the next step.
16. Go back to your Control Panel and go to Game Controllers. Click on "PPJoy Virtual joystick 1" and choose Properties. On the screen that comes up you should be able to press buttons on the PSP and have them show as working on the screen. I recommend calibrating the Analog Stick too.
17. Enjoy!
# More Help
If you use OE 3.x or M33 3.x, make sure your GAME directory is set to 3.x kernel. Otherwise, it will hang on stage 2 of connecting.
If you get the error "80110601" this means PSP_NETPARAM_ERROR_BAD_NETCONF. Try deleting your network configuration on your Sony PSP and making a new one.
The server uses port 20001 to 20004. Make sure you don't have these ports blocked in your firewall or router.
The packets sent are UDP packets so make sure your firewall or router is not dropping UDP packets.
o yah sorry if instructions aren't clear this is my first guide
Hav u ever wanted to play fable on ur psp well now u can just follow these instructions
1. Open the PSP directory and edit the proper wifi.cfg for your PSP version and set the IP of the computer you are going to use this on. If you don't know your IP address. Go to your "Start" menu. Click on "Run..." When the box opens up type "cmd.exe" without the quotes. When the command prompt opens type "ipconfig" without the quotes. It will report your IP address.
2. Copy the correct director(y|ies) to your PSP depending on whether you have a v1.00, v1.50 or v3.xx PSP. If you use a custom firmware mod that allows the use of a single EBOOT.PBP files on a v1.50 PSP then you can use the v1.00 directory.
3. Download and install PPJoy.
4. After it is installed open up your "Control Panel" and click on "Parallel Port Joysticks".
5. When the window comes up click "Add..." at the bottom. On the next screen change "Parallel port" to "Virtual joysticks" and then click "Add."
6. It will want to install some drivers so either have it scan automatically or point it to the directory you installed PPJoy to.
7. After it is done installing, click the "PPJoy Virtual joystick 1" in the menu and click "Mapping..."
8. Choose "Set a custom mapping for this controller" and click "Next."
9. Set these options for best results.
Axes = 2 (X Axis and Y Axis)
Buttons = 9
POV hats = 1
10. X Axis = Analog 0
Y Axis = Analog 1
11. These buttons are up to you to set. You should leave "Button 1" set to "nothing" otherwise you may have problems using the Triangle button on your PSP later.
Button 1 = nothing
Button 2 = Digital 0
Button 3 = Digital 1
Button 4 = Digital 2
Button 5 = Digital 3
Button 6 = Digital 4
Button 7 = Digital 5
Button 8 = Digital 11
Button 9 = Digital 10
12. Directional button POV
North = Digital 6
East = Digital 7
West = Digital 9
South = Digital 8
13. Repeat the steps above to add up to a total of 4 joysticks.
14. Inside the PC directory, you will find a WiFiServer.exe. If you are just using one PSP to play games, you can run this file directly. If, however, you are or will be using more than one PSP, you will need to run one of the batch files in the directory. Simply double-click the batch file for the appropriate controller. You must have a server running for each controller you wish to use. The server(s) must also be running at all times while using the PSP as a joystick. When you are done using it, you can safely exit the program by pressing CTRL+C or clicking the close button for the window.
Example:
Two players will be playing a game. You will need to start the batch files for controller 1 and 2. Player 1 will choose Controller 1 from WiFiController and player 2 will choose Controller 2.
Note:
If the window opens and closes immediately, something went wrong and you'll need to either contact me or figure it out yourself. However, make sure you RETRY all the steps before contacting me. Also try reading over this site and the PPJoy website for help.
15. Now start the program on your PSP, choose your connection and your controller. It should connect to your computer and basically be working. You'll find out in the next step.
16. Go back to your Control Panel and go to Game Controllers. Click on "PPJoy Virtual joystick 1" and choose Properties. On the screen that comes up you should be able to press buttons on the PSP and have them show as working on the screen. I recommend calibrating the Analog Stick too.
17. Enjoy!
# More Help
If you use OE 3.x or M33 3.x, make sure your GAME directory is set to 3.x kernel. Otherwise, it will hang on stage 2 of connecting.
If you get the error "80110601" this means PSP_NETPARAM_ERROR_BAD_NETCONF. Try deleting your network configuration on your Sony PSP and making a new one.
The server uses port 20001 to 20004. Make sure you don't have these ports blocked in your firewall or router.
The packets sent are UDP packets so make sure your firewall or router is not dropping UDP packets.
o yah sorry if instructions aren't clear this is my first guide
